Yes, the panels can be fitted over any level surface (except floors) and as they are only 2-4mm you will not lose space. There is no need to strip off the old tiles. Just clean and rinse down thoroughly then fit the panels over the top.
The joining system is a unique, patented installation method that gives the panels a seamless waterproof join. First apply a high tack adhesive (Seal Tape) to the wall and then apply HG adhesive to the back of the panel and place the panel onto the w
The panels are straightforward to cut using the appropriate tools. The Acrylic panels can be cut using a Stanley knife or fine toothed saw and a metal straight edge. For PVC, we recommend you cut them face up using a fine toothed Jigsaw with a down-c
These have been tested with a host of joining systems in the past but it has been unanimously agreed that none of them do a better job than standard silicone. For these panels, you can either fit them the wall before you install the shower tray or ba
The panels come with a rounded edge which means most of the time you do not need an edge trim. If you purchase a backing strip (2495 x 50mm), then you can fold it into a right angle and fit it onto the edge of the external corner (making sure its plu
You do not have to use backing strips but we do recommend them. A backing strip is a PVC strip of plastic (2495 x 50mm) that you fold into a right angle and then fit into the corner of the room with the HG adhesive on the back. Then use your spirit l
The panels will remain secure to the wall throughout their lifetime. However, should you wish to remove them then you can cut the silicone at the join between the panels and then using a chisel or other flat instrument, prise the panel from the wall.
All of our trade panels are 1220 x 2440 which is 3m². Measure your walls and multiply the height x the width to find your square metre area then add a small amount for wastage (10%) and divide by the panel coverage of 3m.